Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

4750 Yonge Street Unit 116
Toronto, ON, M2N 0J6
Canada

(647) 219-6396

FiiO Q5s Bluetooth DSD DAC and Amplifier

Products

FiiO Q5s Bluetooth DSD DAC and Amplifier

FiiO Q5s(1).jpg
FiiO Q5s(2).jpg
FiiO Q5s(3).jpg
FiiO Q5s(4).jpg
FiiO Q5s(5).jpg
FiiO Q5s(1).jpg
FiiO Q5s(2).jpg
FiiO Q5s(3).jpg
FiiO Q5s(4).jpg
FiiO Q5s(5).jpg

FiiO Q5s Bluetooth DSD DAC and Amplifier

479.99

A Masterpiece Gets Even Better

Features

  • Dual AK4493EQ DAC chips

  • XMOS XUF 208 768K / 32Bit / Native DSD Decoding

  • Bluetooth 5.0 and Supports All Major Bluetooth Codecs

  • Coaxial / Optical / Line-in / USB and 2.5mm / 3.5mm / 4.4mm

Add To Cart

Specifications

  • Model: Q5s

  • Color: Titanium

  • Weight: About 195g

  • Dimensions: About 124mm x 64mm x 16mm

  • Audio Input: Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)

  • Digital Coaxial Input Port: Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)

  • Digital/Optical Input Port: Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)

  • USB Port: Micro USB(11pin) Data exchanging 、 Charging、Firmware upgrade

  • Analog Input port(LO): Standard 3.5mm stereo jack

  • Headphone Output Port: Standard 3.5mm stereo jack

  • Balanced Output Port: 2.5mm/4.4mm port

  • Recommended Headphone Impedance: 16~150Ω(PO) / 16~300Ω(BAL)

  • Channel Balance: 0.1 dB

  • Gain: Yes (High/Low)

  • Bass Boost: Yes

  • Volume Control: Potentiometer(ADC Sampling)

  • APP interconnection: Supports setting through App

  • Bluetooth codec indication: Yes

  • Supports connection to Sony Walkman players: Yes

  • Sampling rate indication: Yes

  • Deep-sleep: automatic stand-by, can be controlled on App

  • Firmware upgrade: System firmware and Bluetooth version can be upgraded through USB

  • Power Supply: DC5V 2A (Recommended)

  • Battery Capacity: 3800 mAh

  • Charge Time: ≤3.5 h (DV5V 2A)

  • Battery Life: >25 h (AUX IN) | >9.5 h (USB IN) | >9.5 h (OPT IN) | >9.5 h (COAX IN) | >9.5 h (Bluetooth IN)

  • Charging Indicator: The side blue light flashes, blue light stays on after it's fully charged

  • Low Battery Warning: Red light flashes twice every 3 seconds

  • Bluetooth: Bluetooth 5.0, supports AAC/SBC/aptX/aptX Low Latency/aptX HD/LDAC/HWA

  • MFi: Yes

  • Sampling Rate Supported Up to: 768kHz/32bit (USB IN) | 192KHz/24bit (COAX IN) | 96KHz/24bit (OPT IN)

  • DSD Support(USB IN): DSD64/128/256

  • Chips Used: DAC: AK4493EQ * 2 | USB: XMOS XU208 | Bluetooth: CSR8675 | LPF: OPA1642×2 | Volume IC: NJW1195 | OP+AMP: AD8620+OPA926

  • Line output specifications:

  • THD+N: <0.001% (1 kHz/10kΩ)

  • SNR: ≥115 dB (A-weighted)

  • Frequency Response: 5 Hz~90 kHz(-3dB

  • Channel Separation: >97 dB (1 kHz)

  • Line level: 1.8 Vrms

    AM3E Headphone out specifications (3.5mm headphone out jack):

  • Output Power 1: ≥280 mW(16Ω / THD+N<1%)

  • Output Impedance: <1.2Ω (32Ω loaded)

  • Output Power 2: ≥210 mW(32Ω /THD+N<1%)

  • Channel Separation: ≥75 dB (1 kHz,AUX IN)

  • Output Power 3: ≥30 mW(300Ω / THD+N<1%)

  • THD+N: <0.002% (1 kHz)

  • Frequency Response: 5 Hz~50 kHz(-3dB)

  • Peak Output Voltage: >6 Vp-p

  • SNR: ≥117 dB (A-weighted)

  • Max. Output Current: 150mA (For reference)

  • Max. Input Level: 3.8 Vrms

    Balanced headphone out specifications (2.5mm/4.4mm TRRS headphone out jack)

  • Output Power 1: ≥535 mW(16Ω / THD+N<1%)

  • Output Impedance: <2Ω (32Ω loaded)

  • Output Power 2: ≥560 mW(32Ω /THD+N<1%)

  • Channel Separation: ≥105 dB (1 kHz,AUX IN)

  • Output Power 3: ≥112 mW(300Ω / THD+N<1%)

  • THD+N: <0.002% (1 kHz)

  • Frequency Response: 5 Hz~50kHz(-3dB)

  • Peak Output Voltage: >10.5 Vp-p

  • SNR: ≥115 dB (A-weighted)

  • Max. Output Current: 150 mA (For reference)